Why does Windows 7 sometimes forget to turn off my display after X number minutes, even though the power settings are specifically set that way?

All we need is an easy explanation of the problem, so here it is.

This is not just a problem with Windows 7 – I know I’ve been experiencing this same issue all the way back through XP. Basically, you set your screen to turn off after 5 or 10 minutes, you walk away, the screen turns off after 5 or 10 minutes. Then 2 or 3 days later, for some reason, the screen stays on at all times despite this setting.

I went back and checked my power settings and they still say the screen should go off after 5 minutes, but that is not what’s happening. After I set it to 5 minutes again (even though that’s what it already says), and click OK, then the feature works…well for a few days anyway until we go back to step 1.

Anyone having this issue constantly?

How to solve :

I know you bored from this bug, So we are here to help you! Take a deep breath and look at the explanation of your problem. We have many solutions to this problem, But we recommend you to use the first method because it is tested & true method that will 100% work for you.

Method 1

Could be a lot of possible reasons, here are my guesses:

  1. It could depend on your mouse, I’ve had mice that even while completely still on a table send a very minor cursor movement signal back to the PC. Try unplugging the mouse to see if that’s the cause.

  2. There are applications that actively prevent windows from turning the screen off, full screen video is the obvious one, there may be something else you have running, check your background applications.

Method 2

I hear your pain. Here’s a little story you can hopefully gleen some usable info from. ๐Ÿ˜‰

I dealt with similar for over a year, and it cheesed me off occasionally although I usually turned my monitors off anyway (CRTs). What was really annoying is that sometimes it would occasionally work on it’s own for a while and then stop working again for weeks or longer, no rhyme nor reason. ๐Ÿ˜‰ No screen savers either – If I “previewed” the screen saver it worked as expected, no problem, mouse/KB stopped it as expected as well.

Disabling startup utilities via MSConfig didn’t help any.

Often it’s caused by USB devices that are “Wake Armed”, which is a device that can wake up the system. You can get your list in Vista/7 via “c:>powercfg -devicequery wake_armed”, usually your mouse, KB and (probably) wired NICs show up.

After sifting though a TON of search results that didn’t quite match my problem, it seemed that most peoples’ answer was their KB and/or mouse keeping the system awake.

I tried pulling my USB mouse and KB, as well as disabling the NIC in the BIOS. It still wouldn’t sleep.

I searched for (new) answers on and off over the months.

I became convinced it wasn’t the OS because it lasted through an upgrade to Win7 from Vista.

And soon after doing that I got myself some brand-spankin’ new LCDs and was suddenly more determined to figure it out.

I broke down and unplugged all other USB devices (other than KB and mouse), of which I have several (various controllers, camera, mp3 player, etc.). Low and behold it worked with nothing BUT the KB and mouse plugged in. So I spent the time to plug them back in, one at a time, and wait for the screen saver/power saving timer to lapse for each new addition.

It turns out (in my case) it was my PC/XBox Xplorer guitar controller from Guitar Hero 3 PC! it “only” took me 5 devices to find it. :/ I searched for that problem specifically, and found new results of a couple other users who had the same problem with the Xplorer for the PC.

The annoying thing is it was always plugged in, even when it WOULD sleep. But it turns out that if the guitar connection itself got out of whack some how (randomly gets the full ring XBox green ring instead of just 1/4 of it when it’s been sitting for a few days) then the sleep would magically start working.

Adding to this was that one of the few things my G/F was doing on the PC during this era, when I was at work, was playing GH3. If the guitar was out of whack, she’d just hit the big XBox button on the guitar and correct it to play.

And then at some point later I’d notice that the power saving had magically stopped working again.

So now I unplug the guitar when I’m not using it. Ironically, my PS3 Wireless guitar that I also plug into USB doesn’t cause this problem, even though it’s not even supposed to be Windows compatible!

Long answer, hope it helps (if you’re still even reading this)! ๐Ÿ˜‰

Method 3

I found this site to be very useful in solving this problem for me, using Windows 8.1:

Windows 7 Screensaver and Power Options Not Working?

The solution for me was Method 4 โ€“ Disable Wake Features.

I was able to quickly use the command prompt, with the command

powercfg /devicequery wake_armed

to discover that my network adapter was set to wake up the computer all the time. I changed that setting and my problem was solved. I tested it by setting my display to turn off in one minute, sat back for a minute, and presto! it turned off nicely.

Method 4

For me, it turned out to be a Rock Candy branded XBox controller. Unplugged it and the machine went to sleep for the first time in months.

Note: Use and implement method 1 because this method fully tested our system.
Thank you ๐Ÿ™‚

All methods was sourced from stackoverflow.com or stackexchange.com, is licensed under cc by-sa 2.5, cc by-sa 3.0 and cc by-sa 4.0

Leave a Reply