Connecting Internal SATA HDD to eSATA

All we need is an easy explanation of the problem, so here it is.

I have these 3 things:

(1) An internal 3.5 SATA HDD.
(2) An independent power supply that provides a Molex style connector (i.e. 5V and 12V power) and an adapter to convert it into SATA (except that it cannot provide the 3.3V found in a SATA power connector).
(3) My PC already provides an eSATA port.

My question now is instead of purchasing an external HDD enclosure, is it possible to use my existing internal SATA 3.5 HDD, powered by my independent power supply, on my PC’s eSATA port directly?

I have the impression that the external HDD enclosure is nothing more than a power supply plus protection. Is there any extra circuit required to convert from SATA->eSATA apart from a cable?

How to solve :

I know you bored from this bug, So we are here to help you! Take a deep breath and look at the explanation of your problem. We have many solutions to this problem, But we recommend you to use the first method because it is tested & true method that will 100% work for you.

Method 1

Yes, it’s possible to use an internal SATA 3.5 HDD powered by your independent power supply. There is no extra circuitry as far as I know, and the only thing you need is the SATA to eSATA cable.

enter image description here

If you have an eSATAp port, you can just use a compatible cable and it will provide power directly from the port.

enter image description here

Here is a picture of an eSATAp to SATA cable which provides direct power from the port.

enter image description here

Note: Use and implement method 1 because this method fully tested our system.
Thank you 🙂

All methods was sourced from stackoverflow.com or stackexchange.com, is licensed under cc by-sa 2.5, cc by-sa 3.0 and cc by-sa 4.0

Leave a Reply